The ORIGINAL. That is the standard whereby all are measured against. I hope I'm right in saying that Performix Plasti Dip is the original or the brand that made rubberized coating mainstream.
What I'm reviewing is the Plasti Dip where all try to use the name in search of rubberized coating, like Kleenex, Panadol, Xerox, Velcro and so on. I'm using Plasti Dip to Dip my faded plastic Registration Plate holder. Faded black plastic is basically black plastic that become grayish white.
I've gotten the spray can of matte black for RM65 at the local detailer that I go to wash my car (I should post some experience with that shop). It would cost around RM60 from KL. Consider the shipping cost, it's a steal as I'm testing one can.
Basically, I've just finished rubberized coating the registration plate holder, and will be spending the year viewing the long term resilience of dip.
According to the can, 4 coats of dip and drying time of 30 minutes in between would be sufficient. That's approximately half a can.
It smells and I had my air purifier in the room where I spray painted it. Maybe I should have done it in a well ventilated area.
It works well and I'll update after I've installed it onto the car.
Wednesday, August 5, 2015
Tuesday, August 4, 2015
The Inspira Dairies: 20 months ownership review
I had the car for 20 months, approximately 27,000km. It was pretty much trouble free from the car itself, apart of the incident when the grass cutter shattered my rear passenger window possibly from the bush cutter. The incident shed some light on owning the Inspira in Miri, Sarawak.
1. You have to wait for parts. I mean, wait two weeks for the replacement window glass to arrive. They were not too expensive (though it was reimbursed by the contractor that did it) even though you had to wait when you purchase the part from Proton Parts Centre. My personal opinion is that the supply of spare parts are not that great in East Malaysia.
2. The competency of the Authorized Service Centre for some of the service technician for non-routine task, including replacing my broken rear passenger window. What happened was they broke the door moulding that is basically the part that is between the window and the door which is meant to keep water and dust from flooding into the door leaf when it rains. Yup, they broke that part. Let this be a reminder to always hover over any repair or work done on your car, if not you would have not known that it was broken in the process. My thanks to the contractor company for reimbursing that part as well since I would not have had it broken from the Service Tech if I didn't I have my window broken in the first place.
3. Yup, the rubber moulding cost more than the glass and I don't know why.
4. Depending on your budget and how you plan to maintain your vehicle, your cost will vary. I've used Shell Helix Ultra 5W-40 since the first oil change. It is a fully synthetic formula that cost a pretty penny, basically RM57/liter off the shelf (4 liter and 1 liter packs). The reason it would cost a bomb is that, the sump requires 4.3l of oil and you need to buy 5 liters. Why? I don't drive as much as I would like which would have the open bottle of oil have the limitation of 3 months shelf life. I change every 6 months due to degradation of oil and engine oil filter design.
5. Mitsubishi parts are somewhat expensive in ways you would not expect. Don't expect Toyota / Proton Wira prices for parts.
6. Due to the long lead in arrivals of parts, I might consider to stock up on certain critical spares that might impede on the functionality of the car. I'm talking about the clutch issue that Inspira faces, basically the hydraulic assist pumps (master and slave units - usually slave) would fail. That is basically the only major mechanical issue that the car might face. Based on forums, there are no predictable mileage that the failure would occur which makes preventive maintenance challenging.
7. You need to rev the engine to above 3000 rpm to get it lively. My car is stock apart from the cosmetic update. Due to the engine mapping to save fuel, the engine is usually stays in the low RPM. How low? At idle it sits at around 600 rpm. Due to possible design of the engine bore and stroke (I could be wrong on this), the engine revs at a slower pace from 1500 rpm to 3000 rpm (it seems slow to me, some might say that it is lazy at that period). This is the waiting time you have to get used to. Once above 3000 rpm, you get to feel the urgency of the engine and you start to move fast. I like it that it docile and quiet in the low range and lively once you strangle it.
8. It's heavier and has less steering feedback than my Satria, but I can still communicate well with the road from the Inspira. Compared to other cars that I've driven, the steering rack is faster and tighter while still manage to provide good amount of feedback and small turning radius.
9. It's comfortable and stable at 150kph. Yup, that's East. Malaysia for you.
10. Would I regret my decision in getting my Inspira? Nope! There is very good online knowledge and support from forums (lowyat.net) meaning you are not flying blind with ownership, even though Proton might not be as supportive for this bastard of a car. Why did I call it Proton's bastard? Proton basically used the knowledge of assembling the Inspira from Mitsubishi to develop the Preve which is their legitimate child. Well, bastards have their charm and you can plug in a 4B11T as someone in the forum has done.
11. Don't buy this car because it is cheap, cause the maintenance would cost the same as you would a RM120,000 car. I think that I've covered this in a post previously. Buy this car if you want to have a manual and want to tune and mod this car. It is a platform car; before you ending up buying the Subaru STi or the Honda Civic Type-R.
My wife seems to enjoy the car and that's rare.
1. You have to wait for parts. I mean, wait two weeks for the replacement window glass to arrive. They were not too expensive (though it was reimbursed by the contractor that did it) even though you had to wait when you purchase the part from Proton Parts Centre. My personal opinion is that the supply of spare parts are not that great in East Malaysia.
2. The competency of the Authorized Service Centre for some of the service technician for non-routine task, including replacing my broken rear passenger window. What happened was they broke the door moulding that is basically the part that is between the window and the door which is meant to keep water and dust from flooding into the door leaf when it rains. Yup, they broke that part. Let this be a reminder to always hover over any repair or work done on your car, if not you would have not known that it was broken in the process. My thanks to the contractor company for reimbursing that part as well since I would not have had it broken from the Service Tech if I didn't I have my window broken in the first place.
3. Yup, the rubber moulding cost more than the glass and I don't know why.
4. Depending on your budget and how you plan to maintain your vehicle, your cost will vary. I've used Shell Helix Ultra 5W-40 since the first oil change. It is a fully synthetic formula that cost a pretty penny, basically RM57/liter off the shelf (4 liter and 1 liter packs). The reason it would cost a bomb is that, the sump requires 4.3l of oil and you need to buy 5 liters. Why? I don't drive as much as I would like which would have the open bottle of oil have the limitation of 3 months shelf life. I change every 6 months due to degradation of oil and engine oil filter design.
5. Mitsubishi parts are somewhat expensive in ways you would not expect. Don't expect Toyota / Proton Wira prices for parts.
6. Due to the long lead in arrivals of parts, I might consider to stock up on certain critical spares that might impede on the functionality of the car. I'm talking about the clutch issue that Inspira faces, basically the hydraulic assist pumps (master and slave units - usually slave) would fail. That is basically the only major mechanical issue that the car might face. Based on forums, there are no predictable mileage that the failure would occur which makes preventive maintenance challenging.
7. You need to rev the engine to above 3000 rpm to get it lively. My car is stock apart from the cosmetic update. Due to the engine mapping to save fuel, the engine is usually stays in the low RPM. How low? At idle it sits at around 600 rpm. Due to possible design of the engine bore and stroke (I could be wrong on this), the engine revs at a slower pace from 1500 rpm to 3000 rpm (it seems slow to me, some might say that it is lazy at that period). This is the waiting time you have to get used to. Once above 3000 rpm, you get to feel the urgency of the engine and you start to move fast. I like it that it docile and quiet in the low range and lively once you strangle it.
8. It's heavier and has less steering feedback than my Satria, but I can still communicate well with the road from the Inspira. Compared to other cars that I've driven, the steering rack is faster and tighter while still manage to provide good amount of feedback and small turning radius.
9. It's comfortable and stable at 150kph. Yup, that's East. Malaysia for you.
10. Would I regret my decision in getting my Inspira? Nope! There is very good online knowledge and support from forums (lowyat.net) meaning you are not flying blind with ownership, even though Proton might not be as supportive for this bastard of a car. Why did I call it Proton's bastard? Proton basically used the knowledge of assembling the Inspira from Mitsubishi to develop the Preve which is their legitimate child. Well, bastards have their charm and you can plug in a 4B11T as someone in the forum has done.
11. Don't buy this car because it is cheap, cause the maintenance would cost the same as you would a RM120,000 car. I think that I've covered this in a post previously. Buy this car if you want to have a manual and want to tune and mod this car. It is a platform car; before you ending up buying the Subaru STi or the Honda Civic Type-R.
My wife seems to enjoy the car and that's rare.
Friday, April 24, 2015
Inspira News: End of Production
There has been news that the Inspira has ended production at the plant and what's left are the remaining stock.
http://motoring-malaysia.blogspot.com/2015/04/proton-inspira-production-has-ended-buy.html
What I do know that it has to come sooner or later, just that Mistubishi has recent plans to keep on pumping Botox into the Lancer, though personally I think that all it needs are better crash specification, newer engine and better interior materials and it would compete with all these rest of the Japanese C segment.
So, if you still want a Japanese DNA manual transmission C Segment sedan built at local prices, this could be your last chance to get one new unmolested.
But, there are several considerations before you buy,
1. Parts are mostly from Mitsubishi and they don't come cheap. Don't expect Proton/Toyota prices for the spare parts.
2. The badge. Can you keep on justifiying to your family/friends why you would get a RM90+k (if you want an auto) Proton? I know I can, I just say Manual Transmission.
3. It's not particularly cutting edge, as it only comes with 2 airbags, 4 star crash test at the time (2007 ish), little interior tech (basically a 2007 C-segment sedan in 2015), NVH that is higher than what's on sale for C-segment. In conclusion, what you are getting is a new car stuck in 2007 on sale in 2015; which is why you can still get a manual.
The good points?
1. The best part, a manual transmission matted to a capable chassis which you can get new for less than RM80,000. I'm saying so since the Preve turbo doesn't come with a manual and is less refined.
So, only consider getting this car new if you want a manual or there are no second hand models on sale in your area.
If you are thinking of getting an auto, there are more considerations that you must go through.
Happy shopping and I guess that you would have a chance to own a part of Malaysia automotive history where enthusiast will talk about it fondly like the Putra or Satria GTi. Probably not like the GTi, but still fondly admired, until you change the front cone to look like a Lancer.
http://motoring-malaysia.blogspot.com/2015/04/proton-inspira-production-has-ended-buy.html
What I do know that it has to come sooner or later, just that Mistubishi has recent plans to keep on pumping Botox into the Lancer, though personally I think that all it needs are better crash specification, newer engine and better interior materials and it would compete with all these rest of the Japanese C segment.
So, if you still want a Japanese DNA manual transmission C Segment sedan built at local prices, this could be your last chance to get one new unmolested.
But, there are several considerations before you buy,
1. Parts are mostly from Mitsubishi and they don't come cheap. Don't expect Proton/Toyota prices for the spare parts.
2. The badge. Can you keep on justifiying to your family/friends why you would get a RM90+k (if you want an auto) Proton? I know I can, I just say Manual Transmission.
3. It's not particularly cutting edge, as it only comes with 2 airbags, 4 star crash test at the time (2007 ish), little interior tech (basically a 2007 C-segment sedan in 2015), NVH that is higher than what's on sale for C-segment. In conclusion, what you are getting is a new car stuck in 2007 on sale in 2015; which is why you can still get a manual.
The good points?
1. The best part, a manual transmission matted to a capable chassis which you can get new for less than RM80,000. I'm saying so since the Preve turbo doesn't come with a manual and is less refined.
So, only consider getting this car new if you want a manual or there are no second hand models on sale in your area.
If you are thinking of getting an auto, there are more considerations that you must go through.
Happy shopping and I guess that you would have a chance to own a part of Malaysia automotive history where enthusiast will talk about it fondly like the Putra or Satria GTi. Probably not like the GTi, but still fondly admired, until you change the front cone to look like a Lancer.
Thursday, April 9, 2015
Enthusiast Car in Malaysia for less than RM100,000
There are people that would like to buy enthusiast car, manual transmission, good handling and adequate power. The problem is Malaysia.
Why?
1. Import duty makes most enthusiast car out of reach to most as a new car
2. Since the cars are already expensive, general Malaysian car buyer thinking is that they don't want to pay a lot to do someone else's work, which is why they want the car to work for them by having an automatic transmission. It really works out that way, if I can get someone to fuck my wife, why would I..... wait??? Is that right?
So, I did some research with my very own opinion on what would be a nice enthusiast car. They are not recommendation as you would need to test drive and do more research on them.
The criteria are:
1. It must cost less than RM100,000
2. It must be not more than 10 years old, meaning 2005 and above at this time of writing
3. It must have a manual
If you plan to get a loan to finance your car, keep in mind that most auto-hire purchase don't do well for cars that are more than 7 years, so you might want to reduce the age of the vehicle.
Another note is that with hire purchases, the interest rates are higher as compared to new purchase. So if your initial budget to have a new car is RM100,000; best to drop your budget to RM90,000 if you are buying used with a loan.
With no alphabetical and correlated order, here is my list.
1. Mini Cooper S 1.6 (2005, 2008) RM65,000 to RM70,000
2. Honda CR-Z (2011-2012) RM75,000 to RM95,000
3. Honda DC5 Type R (2005) RM95,000
4. Subaru Impreza STI Version 8 (2005) RM90,000 to RM95,000
5. Subaru Impreza STI Version 9 (2006) RM100,000
6. Mazda RX-8 (2006) RM55,000 to RM70,000
7. Mazda 3 MPS (2012) RM95,000
8. Mitsubishi EVO 7 (2005) RM80,000
9. Nissan 350z (2005) RM85,000
10. Suzuki Swift Sport (2008 - 2010) RM45,000 to RM60,000
11. Proton Satria NEO R3 Lotus (2010) RM65,000 to RM75,000
12. Proton Inspira 1.8 (2010-2015) RM45,000 to RM80,000
So these are the list, and ouch on the depreciation of my car.
If it was my money with no consideration of other factors?
I would go for the Subaru STI Version 8 with the special edition, (man! I really would get this car if I work in KL)
the Mini Cooper S seems like a nice option if it was primary your wife's car and I would really like it as an occasional driver.
The Subaru STI V9 is a solid second choice,
the DC5 Type R is also great provided you can get the specialize Type-R parts,
CR-Z is fairly new and is a current production (sorta). It drives great.
RX-8 is an awesome choice and a great car for the money (the original 4 door coupe - suicide doors!) if you can find a reliable motor in the car with its rotor seals that are not worn out yet.
350Z would kill you with the road tax of more than RM3,600/year in West Malaysia but would be a great car if you are in East Malaysia where road tax is cheaper
Suzuki Swift Sport would also be a great choice, however I was never drawn to it.
EVO, I only found one at the ads, and might seem a little dodgy on the reliability wise as per normal EVOs.
I've forgotten the Mazda 3 MPS. Did they even come to Malaysia? Why are they here? How come I have never heard of them? I would say that the Mazda 3 MPS are neck in neck with the DC5 Type-R in terms of fun Front Wheel Drive car, but I would need to test both cars.
The Satria Neo R3 Lotus? Unless you are less than 5'2", you would not be comfortable driving that car as the seating position is wrong.
Finally the Inspira? It's the only one when you can still get it new and recheck after 2 years and cry at your depreciation.
That is my list. You could broaden your list, and may include
1. Toyota MR-S, but getting a manual version might have you search for older models. (the one I found was only auto)
2. Basically more choices on BMW like the E60 530i if you don't mind the auto. But the thing about BMW is that, unless I'm getting the E30, E36, E46, I wouldn't want to rush into getting into a BMW at this time of life. I will, eventually and wouldn't mind having an automatic BMW by then.
3. More choices if you can comprise on a automatic, but, if that's the case, I recommend a Camry. Why? Because, if you just want to cruise around and have your neighbours know that you've made it, that is the car for you. Yup! That's the whole point of driving an automatic in Malaysia, letting the car do all the stuff because I'm not a peasant any longer. (I fully understand the appeal of the Camry as it is a cheap, somewhat luxurious car with great reliability, basically like what past Mercedes are like, without the badging)
Why?
1. Import duty makes most enthusiast car out of reach to most as a new car
2. Since the cars are already expensive, general Malaysian car buyer thinking is that they don't want to pay a lot to do someone else's work, which is why they want the car to work for them by having an automatic transmission. It really works out that way, if I can get someone to fuck my wife, why would I..... wait??? Is that right?
So, I did some research with my very own opinion on what would be a nice enthusiast car. They are not recommendation as you would need to test drive and do more research on them.
The criteria are:
1. It must cost less than RM100,000
2. It must be not more than 10 years old, meaning 2005 and above at this time of writing
3. It must have a manual
If you plan to get a loan to finance your car, keep in mind that most auto-hire purchase don't do well for cars that are more than 7 years, so you might want to reduce the age of the vehicle.
Another note is that with hire purchases, the interest rates are higher as compared to new purchase. So if your initial budget to have a new car is RM100,000; best to drop your budget to RM90,000 if you are buying used with a loan.
With no alphabetical and correlated order, here is my list.
1. Mini Cooper S 1.6 (2005, 2008) RM65,000 to RM70,000
2. Honda CR-Z (2011-2012) RM75,000 to RM95,000
3. Honda DC5 Type R (2005) RM95,000
4. Subaru Impreza STI Version 8 (2005) RM90,000 to RM95,000
5. Subaru Impreza STI Version 9 (2006) RM100,000
6. Mazda RX-8 (2006) RM55,000 to RM70,000
7. Mazda 3 MPS (2012) RM95,000
8. Mitsubishi EVO 7 (2005) RM80,000
9. Nissan 350z (2005) RM85,000
10. Suzuki Swift Sport (2008 - 2010) RM45,000 to RM60,000
11. Proton Satria NEO R3 Lotus (2010) RM65,000 to RM75,000
12. Proton Inspira 1.8 (2010-2015) RM45,000 to RM80,000
So these are the list, and ouch on the depreciation of my car.
If it was my money with no consideration of other factors?
I would go for the Subaru STI Version 8 with the special edition, (man! I really would get this car if I work in KL)
the Mini Cooper S seems like a nice option if it was primary your wife's car and I would really like it as an occasional driver.
The Subaru STI V9 is a solid second choice,
the DC5 Type R is also great provided you can get the specialize Type-R parts,
CR-Z is fairly new and is a current production (sorta). It drives great.
RX-8 is an awesome choice and a great car for the money (the original 4 door coupe - suicide doors!) if you can find a reliable motor in the car with its rotor seals that are not worn out yet.
350Z would kill you with the road tax of more than RM3,600/year in West Malaysia but would be a great car if you are in East Malaysia where road tax is cheaper
Suzuki Swift Sport would also be a great choice, however I was never drawn to it.
EVO, I only found one at the ads, and might seem a little dodgy on the reliability wise as per normal EVOs.
I've forgotten the Mazda 3 MPS. Did they even come to Malaysia? Why are they here? How come I have never heard of them? I would say that the Mazda 3 MPS are neck in neck with the DC5 Type-R in terms of fun Front Wheel Drive car, but I would need to test both cars.
The Satria Neo R3 Lotus? Unless you are less than 5'2", you would not be comfortable driving that car as the seating position is wrong.
Finally the Inspira? It's the only one when you can still get it new and recheck after 2 years and cry at your depreciation.
That is my list. You could broaden your list, and may include
1. Toyota MR-S, but getting a manual version might have you search for older models. (the one I found was only auto)
2. Basically more choices on BMW like the E60 530i if you don't mind the auto. But the thing about BMW is that, unless I'm getting the E30, E36, E46, I wouldn't want to rush into getting into a BMW at this time of life. I will, eventually and wouldn't mind having an automatic BMW by then.
3. More choices if you can comprise on a automatic, but, if that's the case, I recommend a Camry. Why? Because, if you just want to cruise around and have your neighbours know that you've made it, that is the car for you. Yup! That's the whole point of driving an automatic in Malaysia, letting the car do all the stuff because I'm not a peasant any longer. (I fully understand the appeal of the Camry as it is a cheap, somewhat luxurious car with great reliability, basically like what past Mercedes are like, without the badging)
Friday, March 27, 2015
The Inspira Dairies: The Cost of Cosmetic Conversion
This would be the tale that would be a warning to all Inspira owners in Malaysia. In simple terms, if you don't have the cash, then don't do it.
I guess Murphy's Law is true in just about anything that you think you know quite well about, except for the things that you have done so personally and in great frequency.
I'm talking in terms of cost and time spent on cosmetic conversion of my humble Proton Inspira into a 2011/2012 Mitsubishi Lancer GT (with Ralliart front facia).
My initial intent went back to 2013 where I would source for Lancer GT rims circa 2008-2010 which are 18" rims that would make my ride slightly more tough looking. However, poking and prodding around asking for items just got myself into trouble.
I asked my then housemate that if he's seen or known any owner that wishes to let go of their OEM Lancer GT rims, I would be very much interested to alight their burden. Then, one fine day when I was in Bintulu, my then housemate told me that his neighbour wishes to sell his rims plus some items. Curious (mein untergang) I agreed to have a looked. Walking into his house (the seller) he went straight to the spare room and showed me his front and rear bumper, side skirts, sport exhaust and rear spoiler and explained to me the items. He spoke of the price of letting go of the 4 factory fitted rims (18" Enkei OEMs), 2 used tyres (Yokohama's OEMs), front and rear bumper, side skirts, front bonnet, sport exhaust and rear spoiler at a very attractive price.
However, there are several items that would need attention, mainly on the front bumper. The Ralliart styled chrome garnish is cracked and would need a replacement, the front-lower plastic honeycomb grill is cracked due to a large stone hit and would also need replacement, front emblem is cracked and need replacement. I knew of the conditions of the items that needed replacement, and the general conditions of all the other items seem to be at good condition, meaning 8/10, not perfect but is as good as you can get besides getting it new of pinching it from a factory fresh car. I calculated in my head of the items that needed replacement, as in; Guestimate the Chrome Garnish to be around RM450++, Front-Lower Honeycomb Grill around RM100++ and the missing tow hook cover. Boy, was I wrong (which I'll elaborate further in the post). I made a decision based the package of having the rims and OEM bumpers, skirts, hood and spoilers that it was a reasonable price, shaked the seller's hand and transferred money to his account. That was just the start of the project/problem.
First, the issue to transporting the items, as it may has been the fact that I was driving the Inspira and had some luggage in the trunk, I haphazardly fitted the used tyres and sport exhaust into the back seat of my car and traveled 230+km from Bintulu to Miri. The other problem was transporting the rest of the items including the rims, bumpers and skirts to Miri. It took me another 5 months or so to arrange for transport of those items and I am deeply in gratitude to the guys who transported the items back to Miri. That is when the project made past it first stage. The second stage would see even more money being poured out.
[Tire'd passanger]
I took a look at the front bumpers, and made the assessment of the items that needed to be changed. I took apart the Front Chrome Garnish and the broken Front-Lower Honeycomb Grill. Next, I took the front emblem out as it was already broken. I list out the items that needed replacing by searching through the internet for the part numbers.
Do you know how far off I was at guestimating the broken parts? The Chrome Garnish was close to RM1,000 for a piece of plastic that is painted to look like chrome. Plastic chrome that cost RM1,000. If you think Mitsubishi is cheap, just try buying it's chrome pieces made of plastic. The plastic grill cost around RM160, towing hook cover cost more than RM30, front grill emblem cost close to RM100, a total of more than RM1,200 just for replacement parts for damaged/missing sub-parts on the front bumper. Then, there is the clips for the side skirts and they cost a whooping RM130+ just for the plastic clips that would hold the side skirts in-place, bringing in the total of RM1,400 just for parts prior to installing the white (did I mention that they were white) bumpers onto my black car.
That was just Phase 2, buying replacement parts.
Next, it came down to the planning of having the cosmetic items to be spray painted and installed onto my car. But, there was another issue of having to transport the bumpers to the bodyshop. Good thing I had my Satria with me. The ultra versatile hatchback prove its usefulness by having me taking out the passenger seat just so that the car interior would be long enough to carry the bumpers and skirts. It worked out great. The bodyshop owner agreed to take off the Inspira's front and rear bumper and have it ready for me to transport it back. It was then I managed to see my car without any front and rear bumpers. It's amazing how modern cars have their bumper wrap up high into the rear three-quarter panel.
It took a week or so to have the bumpers and skirts spray painted and installed. However, I was not in a hurry at the time and told the bodyshop to take it's time. He was a meticulous type and I trust him on his workmanship, basically as anal as I am with no half measures in details. Once the paint in completed, my wife went to pick up the car.
There was more news, it needed a new Front Grit/Splash Guard where the bottom of the front bumper meets the engine skid/splash guard. This was because the Ralliart styled front bumper has a different overhang as the Inspira and non-Ralliart front bumpers.
The cost? another RM400.
The total cost of having the cosmetic transplant ended up to be close to RM5,500 including various items where I later bought the rear emblem as well as other cost. Note that I have not included the tyres, balancing and alignment in changing the rims to the 18-inchers.
Lessons learned? Well, it cost more than double of what I would have anticipated to switch the front and rear bumpers, side skirts of the car, with all the various parts that I needed to replaced. Hence, I suggest everyone to do more research on the items and prices if possible.
The reason of all this madness? Well, I mainly did it because the bumpers and parts are OEM, taken down from a Lancer and I would be basically installing OEM parts which fits nicely onto my Inspira. The advice from the bodyshop from past experience with the same conversion, but with third party parts proved less than satisfactory. It was the case of either the quality of the bumpers were too porous to accept paint, the clips and fittings are not aligned with the body, and the overall fit and finish just looked aftermarket, instead of factory fitted. However, aftermarket has very attractive pricing, of less than RM500 for the complete set of front bumper, whereby I could have bought two (aftermarket) front bumpers for the price of my replacement Front Chrome Garnish! But, I was sceptical to save on items which has the higher probability of me having to redo with the original parts anyway. Spending on the right items are almost always more effective especially when I plan to have it last as long as the vehicle.
Cost??? Think of it this way; when I bought my car, I've gotten a deep discount of RM10,000. I'm just using the savings to cosmetically convert my car to something I admire, plus MANUAL TRANSMISSION!!!
UPDATE: It requires a new splash shield/grid guard/engine front bottom shield which cost around RM400. I just broken the original one while driving at 80km/hr when the vortex induced vibration caused the thing to snap off and drag on the road. Blimey!
I guess Murphy's Law is true in just about anything that you think you know quite well about, except for the things that you have done so personally and in great frequency.
I'm talking in terms of cost and time spent on cosmetic conversion of my humble Proton Inspira into a 2011/2012 Mitsubishi Lancer GT (with Ralliart front facia).
[Not my actual car]
My initial intent went back to 2013 where I would source for Lancer GT rims circa 2008-2010 which are 18" rims that would make my ride slightly more tough looking. However, poking and prodding around asking for items just got myself into trouble.
I asked my then housemate that if he's seen or known any owner that wishes to let go of their OEM Lancer GT rims, I would be very much interested to alight their burden. Then, one fine day when I was in Bintulu, my then housemate told me that his neighbour wishes to sell his rims plus some items. Curious (mein untergang) I agreed to have a looked. Walking into his house (the seller) he went straight to the spare room and showed me his front and rear bumper, side skirts, sport exhaust and rear spoiler and explained to me the items. He spoke of the price of letting go of the 4 factory fitted rims (18" Enkei OEMs), 2 used tyres (Yokohama's OEMs), front and rear bumper, side skirts, front bonnet, sport exhaust and rear spoiler at a very attractive price.
However, there are several items that would need attention, mainly on the front bumper. The Ralliart styled chrome garnish is cracked and would need a replacement, the front-lower plastic honeycomb grill is cracked due to a large stone hit and would also need replacement, front emblem is cracked and need replacement. I knew of the conditions of the items that needed replacement, and the general conditions of all the other items seem to be at good condition, meaning 8/10, not perfect but is as good as you can get besides getting it new of pinching it from a factory fresh car. I calculated in my head of the items that needed replacement, as in; Guestimate the Chrome Garnish to be around RM450++, Front-Lower Honeycomb Grill around RM100++ and the missing tow hook cover. Boy, was I wrong (which I'll elaborate further in the post). I made a decision based the package of having the rims and OEM bumpers, skirts, hood and spoilers that it was a reasonable price, shaked the seller's hand and transferred money to his account. That was just the start of the project/problem.
First, the issue to transporting the items, as it may has been the fact that I was driving the Inspira and had some luggage in the trunk, I haphazardly fitted the used tyres and sport exhaust into the back seat of my car and traveled 230+km from Bintulu to Miri. The other problem was transporting the rest of the items including the rims, bumpers and skirts to Miri. It took me another 5 months or so to arrange for transport of those items and I am deeply in gratitude to the guys who transported the items back to Miri. That is when the project made past it first stage. The second stage would see even more money being poured out.
I took a look at the front bumpers, and made the assessment of the items that needed to be changed. I took apart the Front Chrome Garnish and the broken Front-Lower Honeycomb Grill. Next, I took the front emblem out as it was already broken. I list out the items that needed replacing by searching through the internet for the part numbers.
[This was the rims]
Do you know how far off I was at guestimating the broken parts? The Chrome Garnish was close to RM1,000 for a piece of plastic that is painted to look like chrome. Plastic chrome that cost RM1,000. If you think Mitsubishi is cheap, just try buying it's chrome pieces made of plastic. The plastic grill cost around RM160, towing hook cover cost more than RM30, front grill emblem cost close to RM100, a total of more than RM1,200 just for replacement parts for damaged/missing sub-parts on the front bumper. Then, there is the clips for the side skirts and they cost a whooping RM130+ just for the plastic clips that would hold the side skirts in-place, bringing in the total of RM1,400 just for parts prior to installing the white (did I mention that they were white) bumpers onto my black car.
That was just Phase 2, buying replacement parts.
[That was how it arrived, pretty right?]
Next, it came down to the planning of having the cosmetic items to be spray painted and installed onto my car. But, there was another issue of having to transport the bumpers to the bodyshop. Good thing I had my Satria with me. The ultra versatile hatchback prove its usefulness by having me taking out the passenger seat just so that the car interior would be long enough to carry the bumpers and skirts. It worked out great. The bodyshop owner agreed to take off the Inspira's front and rear bumper and have it ready for me to transport it back. It was then I managed to see my car without any front and rear bumpers. It's amazing how modern cars have their bumper wrap up high into the rear three-quarter panel.
[Which is now that I only know that the Satria is GODLIKE!]
It took a week or so to have the bumpers and skirts spray painted and installed. However, I was not in a hurry at the time and told the bodyshop to take it's time. He was a meticulous type and I trust him on his workmanship, basically as anal as I am with no half measures in details. Once the paint in completed, my wife went to pick up the car.
[Final look before transplant]
There was more news, it needed a new Front Grit/Splash Guard where the bottom of the front bumper meets the engine skid/splash guard. This was because the Ralliart styled front bumper has a different overhang as the Inspira and non-Ralliart front bumpers.
The cost? another RM400.
[Naked front]
The total cost of having the cosmetic transplant ended up to be close to RM5,500 including various items where I later bought the rear emblem as well as other cost. Note that I have not included the tyres, balancing and alignment in changing the rims to the 18-inchers.
[Naked rear]
Lessons learned? Well, it cost more than double of what I would have anticipated to switch the front and rear bumpers, side skirts of the car, with all the various parts that I needed to replaced. Hence, I suggest everyone to do more research on the items and prices if possible.
The reason of all this madness? Well, I mainly did it because the bumpers and parts are OEM, taken down from a Lancer and I would be basically installing OEM parts which fits nicely onto my Inspira. The advice from the bodyshop from past experience with the same conversion, but with third party parts proved less than satisfactory. It was the case of either the quality of the bumpers were too porous to accept paint, the clips and fittings are not aligned with the body, and the overall fit and finish just looked aftermarket, instead of factory fitted. However, aftermarket has very attractive pricing, of less than RM500 for the complete set of front bumper, whereby I could have bought two (aftermarket) front bumpers for the price of my replacement Front Chrome Garnish! But, I was sceptical to save on items which has the higher probability of me having to redo with the original parts anyway. Spending on the right items are almost always more effective especially when I plan to have it last as long as the vehicle.
[Almost the end??]
Cost??? Think of it this way; when I bought my car, I've gotten a deep discount of RM10,000. I'm just using the savings to cosmetically convert my car to something I admire, plus MANUAL TRANSMISSION!!!
UPDATE: It requires a new splash shield/grid guard/engine front bottom shield which cost around RM400. I just broken the original one while driving at 80km/hr when the vortex induced vibration caused the thing to snap off and drag on the road. Blimey!
Wednesday, March 18, 2015
The Inspira Dairies: What the Inspira is Not.
[Dirty dirty, which is why you never follow a truck in the rain especially long distance driving]
The Inspira is not an economical car in Malaysian standards of car ownership. In Malaysia, the best car to buy on a budget is the Perodua Myvi (based on 2013/2014 car launches). It's practical, cheap to maintain, consumable parts are relatively cheap, runs great, have good fuel economy and basically everyone (or a relative) has one. The reason I said that the Inspira is not an economical car in Malaysia standards is because most people are used to Myvi prices of ownership.
Based on 1 year of ownership, these are the reasons I can think of.
1. It's has a 1.8/2.0l engine which requires roughly 4.3l of engine lubricant. You may think you can just grab any cheap motor oil to run your engine, but be ready to face bad compression and premature engine failure with high viscosity oil. Manufacture recommends engine oil specifications that to keep the engine running at the optimum performance with minimal tapet wear and valve distress (basically keeping your engine from failing), low viscosity fully synthetic motor oil is required. Do you know how much does the low viscosity fully synthetic oil cost? Brands or classification are typically Shell Helix Ultra or Castrol GTX3 which is about RM55++ per liter. For an oil change, it would require a 4l plus a 1l to fill the sump and engine compartment. And you know what? There is no saving the excess 0.7l of extra oil since opened unused oil starts to deteriorate in 3 months, therefore under normal usage or oil change at 10,000km/6 monthly interval changes would make it impossible to utilize the extra oil, unless you have another car which could utilize the excess. Total oil change with labour and filters would usually cost up to RM400 or thereabouts.
2. If you were to follow the manufacturer recommended service and maintenance specification, it would be very costly and usually in the price range of Honda Civic type maintenance prices. Cabin air filters cost around the best part of RM150 or thereabouts and the engine air intake filters cost about RM170++. These items are required to be changed at 1 year interval. Why? For the cabin air filter, since changing, the air from the AC was much fresher and a noticeable difference. In Malaysia with the humid climate, you would get mold growing in the cabin air filter. If not properly replaced, it would spread to the internals of the air ducts and spread into your lungs. Your decision, but in a car like the Myvi, you could probably get the cabin air filter for less than RM100. And for the engine air intake filters, they are just for optimum engine maintenance and performance.
3. Tyres cost are more than standard 13" to 15" tyre sizes. The Inspira starts with an 16" to 17" inch rims. That translate to tyre cost from reputable brands to be start at RM350 a pop for the lowest rung. Expect to pay for RM400 to 450 for good ones. That would cost at least RM1600 for tyres.
4. (This is based on Internet forum discussion) If you have the manual, you need change the clutch pads and the gear lub/oil at 80km interval (user recommendation). Lube are the super low viscosity type and expect it to more pricy than ecomonical alternatives. And there is a possibility of the hydraulic assisted clutch master and slave cylinder to be replaced especially the seal failure under spirited driving and clutch flogging. Cost are around RM1000++ for the set of master and slave cylinder. The problem for the slave and master cylinder might not be the cost, but rather the delivery time of the parts. (Personal note: it is the associated cost of enjoying a car with manual transmission where it is more fun)
5. Parts from Mitsubishi are expensive. Those body panels, items do come at an import tax and are expensive or basically not what you would expect from a Proton brand. Small items that might seem simple cost a lot. They are practically at the same price point as Honda parts at the Civic level. Don't expect Proton prices for this as the other items are Mitsubishi prices. Basically, you buy the car at Proton prices but maintain it at Mitsubishi/Honda price levels. I'll give a brief of items from Mitsubishi in another post.
Are this enough for me to regret my purchase? No!!! It's a fun car, a manual and that is how I like it. If you want something cheap and Godlike, get the Vios. I recommend it for people that couldn't be bothered about cars. Really, the Vios is a good car, just not what I would ever buy, just like some people would never buy Proton. See?
Monday, March 9, 2015
The Inspira Diaries: Taking Delivery
Taking delivery of a brand new car usually goes like this. You call the salesperson/dealership and he tells you that it should be arriving in a day or so. You call him again the next day and he says that it should arrive in the afternoon. You asked for the estimated time of arrival and he says sometime in the afternoon. This is going nowhere. You sit in your ergonomic chair thinking that the trailer that's delivering your splendidly sourced and nothing-to-option base trim level car is stuck behind those stupid tipper trucks that always carry mud or sand that is way above the load limit and might be giving your car a sandblast.
Alright, I admit that I'm a little biased towards those tipper/dump trucks, but I don't want my new car to look like the Sandman took a piss on it and then ejaculated on the windshield for good measure. I want the utmost care taken during the delivery of my pristine example of the base model car that I can only have in the previous year stock. Am I asking too much? Which makes me wonder, if I was taking delivery of a BMW, would be under the same conditions of the delivery?
It would arrive on Friday, I was told. I called the dealer asking for updates. He said 4pm. I called again at 3, he said 5pm. I called again at 4pm. He said 6pm. Nothing against the man, cause I think it is part of the driving a trailer behind an overloaded dump truck that drives at 60kph, and the excitement of getting my first brand new car. Makes you feel like a kid.
I went to take delivery of my car at 6pm. The salesperson was nice enough to tint my car darker as though black is not black enough, and fill up with a full tank of gas which I didn't request for. Awfully nice of him. Side note: I just don't understand why the salesperson would need to go though unfanthomable lengths to give freebies to a low commission car, or any car for that matter. If the car is good and after sales service is existent, it would be a reason to purchase the said car. But, I degrees, since the general Malaysian buying public are mostly looking for the best deals regardless of the vehicle in question.
So I took delivery of the car, checked all 4 corners of the car for any dings and nicks and found none, except for one on the front hood which was negligible since driving it on the road would incur stone chips on hood anyway. It was one of the reason I wanted white paint in the first place, since any anomalies would not be noticeable in the first pass. But, the Inspira in Black really does look menacing. It feels Ah Beng. It feels LaLa. It is the next Proton Putra, sorta.
Anyways, I got the car and I immediately test drove the car for any problems. There was none. I asked the salesperson to then take off all the plastic covering the seats. I'm not about to be those kind of people that drives a new car with plastic seat covers. There I was, happy of my new car and ready to pick up my-then girlfriend parents (in laws now). And the manual transmission is what I hoped it would be.
Alright, I admit that I'm a little biased towards those tipper/dump trucks, but I don't want my new car to look like the Sandman took a piss on it and then ejaculated on the windshield for good measure. I want the utmost care taken during the delivery of my pristine example of the base model car that I can only have in the previous year stock. Am I asking too much? Which makes me wonder, if I was taking delivery of a BMW, would be under the same conditions of the delivery?
It would arrive on Friday, I was told. I called the dealer asking for updates. He said 4pm. I called again at 3, he said 5pm. I called again at 4pm. He said 6pm. Nothing against the man, cause I think it is part of the driving a trailer behind an overloaded dump truck that drives at 60kph, and the excitement of getting my first brand new car. Makes you feel like a kid.
I went to take delivery of my car at 6pm. The salesperson was nice enough to tint my car darker as though black is not black enough, and fill up with a full tank of gas which I didn't request for. Awfully nice of him. Side note: I just don't understand why the salesperson would need to go though unfanthomable lengths to give freebies to a low commission car, or any car for that matter. If the car is good and after sales service is existent, it would be a reason to purchase the said car. But, I degrees, since the general Malaysian buying public are mostly looking for the best deals regardless of the vehicle in question.
So I took delivery of the car, checked all 4 corners of the car for any dings and nicks and found none, except for one on the front hood which was negligible since driving it on the road would incur stone chips on hood anyway. It was one of the reason I wanted white paint in the first place, since any anomalies would not be noticeable in the first pass. But, the Inspira in Black really does look menacing. It feels Ah Beng. It feels LaLa. It is the next Proton Putra, sorta.
Anyways, I got the car and I immediately test drove the car for any problems. There was none. I asked the salesperson to then take off all the plastic covering the seats. I'm not about to be those kind of people that drives a new car with plastic seat covers. There I was, happy of my new car and ready to pick up my-then girlfriend parents (in laws now). And the manual transmission is what I hoped it would be.
Subscribe to:
Posts (Atom)